السلام علیکم
دوستوں آپ کی مدد کی ضرورت ہے۔ میرے پی سی میں ایک پرابلم آرہی ہے۔ جب آن کر تا ہوں تو آن ہونے کے بعد ڈسپلے نہیں ہوتا۔ ایل سی ڈی پر میسیج آتا ہے۔ چیک یور ۔ وڈیو کیبل۔ سی ڈی روم بھی اوپن نہیں ہو رہا۔
پلیز میری مدد کرین کہ ایسا کیوں ہے۔
السلام علیکم
دوستوں آپ کی مدد کی ضرورت ہے۔ میرے پی سی میں ایک پرابلم آرہی ہے۔ جب آن کر تا ہوں تو آن ہونے کے بعد ڈسپلے نہیں ہوتا۔ ایل سی ڈی پر میسیج آتا ہے۔ چیک یور ۔ وڈیو کیبل۔ سی ڈی روم بھی اوپن نہیں ہو رہا۔
پلیز میری مدد کرین کہ ایسا کیوں ہے۔
تمام کیبل نکال کر دوبارا لگائیں انشاء الله حل هوجائے گا
1.Turn off your computer.
2.Unplug the cable running from your monitor to your PC and plug it back in, making sure the connection is firm. The most common cause of this error is a loose cable.
3.Reattach the cable running from your monitor to your PC. If the monitor is still not displaying a signal after firmly reattaching the cable, the problem could lie with the cable, especially if the cable has visible damage.
4.Replace your monitor with another monitor if possible. If the "No Input Signal" error still appears, the problem does not rest with the cables or the monitor, but with your PC.
5.Open your PC case and locate your video card. Remove the card and then replace it firmly in its slot or, if possible, insert the video card into another slot on your motherboard. A video card that is not making a firm connection will not display images to the monitor. Close your PC case and test the monitor again.
6.Replace your video card completely. Your video card may suffer from internal damage that is not allowing it to output a signal.
Tips
If you are still not receiving a signal even after replacing your video card, you may also need to replace the computer's power supply and, in a worst-case scenario, your computer's motherboard.
If your computer is still under warranty, arrange for an official repair before you open up your computer. Often, opening your computer yourself will void your warranty.
Thanks for reply
I will try to this methods
Pleas close this thread
Bookmarks